Home      Glossary
Print this pageAdd to Favorite

ACOUSTIC GLOSSARY

ABSORPTION: A property of materials that allows a reduction in the amount of sound energy reflected. The introduction of an absorbent material into the surfaces of a room will reduce the sound pressure level in that room by not reflecting all of the sound energy striking the room's surfaces. The effect of absorption merely reduces the resultant sound level in the room produced by energy that has already entered the room.

ABSORPTION COEFFICIENT: A measure of the sound-absorbing ability of a surface. It is defined as the fraction of incident sound energy absorbed or otherwise not reflected by a surface. Unless otherwise specified, a diffuse sound field is assumed. The values of the sound-absorption coefficient usually range from 0.01 for marble slate to almost 1.0 for long absorbing wedges often used in anechoic rooms.

ACOUSTICS: 1. The science of sound, including the generation, transmission, and effects of sound waves, both audible and inaudible. 2. The physical qualities of a room or other enclosure (such as size, shape, amount of noise) that determine the audibility and perception of speech and music within the room.

ACOUSTIC TRAUMA: Damage to the hearing mechanism caused by a sudden burst of intense noise, or by a blast. The term usually implies a single traumatic event.

AIRBORNE SOUND: Sound that reaches the point of interest by propagation through the air.

AMBIENT NOISE: The total of all noise in the environment, other than the noise from the source of interest. The term is used interchangeably with the term background noise.

ANSI: The American National Standards Institute.

ATTENUATION: The reduction of sound intensity by various means (e.g., air, humidity, porous materials, etc).

AUDIO FREQUENCY: The frequency of oscillation of an audible sound wave. Any frequency between 20 and 20,000 hertz.

AUDIOMETER: An instrument for measuring individual hearing activity.

BACKGROUND NOISE: The total of all noise in a system or situation, independent of the presence of the desired signal. In acoustical measurements, strictly speaking, the term "background noise" means electrical noise in the measurement system. However, in popular usage the term "background noise" is often used to mean the noise in the environment, other than the noise from the source of interest.

BAND: Any segment of the frequency spectrum.

BAND PASS FILTER: A wave filter that has a single transmission band extending from a lower cutoff frequency greater than zero to a finite upper cutoff frequency spectrum.

BROADBAND NOISE: Noise with components over a wide range of frequencies.

CALIBRATIOR (ACOUSTICAL): A device that produces a known sound pressure on the microphone of a sound level measurement system, and is used to adjust the system to Standard specifications.

CUTOFF FREQUENCIES: The frequencies that mark the ends of a band, or the points at which the characteristic of a filter change from pass to no-pass.

CYCLE: The complete sequence of values of a periodic quantity that occurs during one period.

CYCLES PER SECOND: A measure of frequency numerically equivalent to hertz.

CYLINDRICAL WAVE: A wave in which the surfaces of the constant phase are coaxial cylinders. A line of closely spaced sound sources radiating into an open space produces a free sound field of cylindrical waves.

DAMPING: The dissipation of energy with time or distance. The term is generally applied to attenuation of sound in a structure owing to the internal sound-dissipative properties of the structure or to the addition of sound-dissipative materials.

dBA: Unit of sound level. The weighted sound pressure level by the use of the A metering characteristics and weighted specified in ANSI Specifications for Sound Level Meters. dBA is used as a measure of human response to sound.

DECIBEL: A unit of sound pressure level, abbreviated dB.

DIFFRACTION: A modification, which sound waves undergo in passing by the edges of solid bodies.

DOPPLER EFFECT (DOPPLER SHIFT): The apparent upward shift in frequency of a sound as a noise source approaches the listener or the apparent downward shift when the noise source recedes. The classic example is the change in pitch of a railroad whistle as the locomotive approaches and passes by.

ECHO: A wave that has been reflected or otherwise returned with sufficient magnitude and delay, so as to be detected as a wave distinct from that directly transmitted.

FAR FIELD: Describes a sound source region in the free space where the sound pressure level obeys the inverse-square law (the sound pressure level decreases 6 dB with each doubling of distance from the source). Also, in this region the sound particle velocity is in phase with the sound pressure. Closer to the source where these two conditions do not hold constitutes the 'near field" region.

FILTER: A device for separating components of a signal on the basis of their frequency. It allows components in one or more frequency bands to pass relatively unattenuated, and it attenuates components in other frequency bands.

FREE SOUND FIELD (FREE FIELD): A sound field in which the effects of obstacles or boundaries on the sound propagated in that field is negligible.

FREQUENCY: The number of times per second that the sine wave of the sound repeats itself, or that the sine wave of vibrating object repeats itself. Now expressed in hertz (Hz), formerly in cycles per second (cps).

HEARING: The subjective human response to sound.

HEARING LEVEL: A measured threshold of hearing at a specified frequency, expressed in decibels relative to specified standard of normal hearing. The deviation of an individual's threshold in decibels from the zero reference of the audiometer.

HEARING LOSS: A term denoting an impairment of auditory acuity. The amount of hearing impairment, in decibels, measured as a set of hearing threshold levels at specified frequencies. Types of hearing loss are 1. Conductive: A loss originating in the conductive mechanism of the ear; 2. Sensor-neural: 3 A loss originating in the cochlea or the fibers of the auditory nerve; 3. Noise induced: A sensor-neural loss attributed to the effects of noise.

HERTZ (Hz): Unit of measurement of frequency, numerically equal to cycles per second.

IMPACT INSULATION CLASS (IIC): A single-figure rating that compares the impact sound insulating capabilities of floor-ceiling assemblies to a reference contour.

IMPACT SOUND: The sound produced by the collision of two solid objects. Typical sources are footsteps, dropped objects, etc. on an interior surface (wall, floor, ceiling) of a building.

INFRASONIC: Sounds of a frequency lower than 20 hertz.

INTENSITY: The sound energy flow through a unit area in a unit of time.

ISO: The International Organization for Standardization.

LEVEL: The logarithm of the ratio of a quantity to a reference quantity of the same kind. The base of the logarithm, the reference quantity, and the kind of level must be specified.

LOGARITHM: The exponent that indicates the power to which a number must be raised to produce a given number. For example, for the base 10 logarithm, used in acoustics, 2 is the logarithm of 100.

LOUDNESS: The subjective judgment of intensity of a sound by humans. Loudness depends upon the sound pressure and frequency of the stimulus. Over much of the frequency range it takes about a threefold increase in sound pressure (a tenfold increase in acoustical energy, or, 10 dB) to produce a doubling of loudness.

LOUDNESS LEVEL: Measured in phons it is numerically equal to the median sound pressure level (dB) of a free progressive 1000 Hz wave presented to listeners facing the source, which in a number of trials is judged by the listeners to be equally loud.

MASKING: 1. The process by which the threshold of audibility for a sound is raised by the presence of another (masking) sound. 2. The amount by which the threshold of audibility of a sound is raised by the presence of another (masking) sound.

MASKING NOISE: A noise that is intense enough to render inaudible or unintelligible another sound that is also present.

MEDIUM: A substance carrying a sound wave.

NEAR FIELD: The sound field very near to the source, where the sound pressure does not obey the inverse-square law and the particle velocity is not in phase with the sound pressure.

NIOSH: The National Institute for Occupational Safety and Health.

NOISE: 1. Unwanted sound. 2. Any sound not occurring in the natural environment, such as sounds emanating from aircraft, highways, industrial, commercial and residential sources. 3. An erratic, intermittent, or statistically random oscillation.

NOISE ISOLATION CLASS: (NIC) A single number rating derived in a prescribed manner from the measured values of noise reduction between two areas or rooms. It provides an evaluation of the sound isolation between two enclosed spaces that are acoustically connected by one or more paths.

NOISE LEVEL: For airborne sound, unless specified to the contrary, it is the A-weighted sound level.

NOISE REDUCTION (NR): The numerical difference, in decibels, of the average sound pressure levels in two areas or rooms after treatment. A measurement of "noise reduction" combines the effect of the sound transmission loss performance of structures separating the two areas or rooms, plus the effect of acoustic absorption present in the receiving room.

NOISE REDUCTION COEFFICIENT (NRC): A measure of the acoustical absorption performance of a material, calculated by averaging its sound absorption coefficients at 250, 500, 1000 and 2000 Hz, expressed to the nearest multiple of 0.05.

OCTAVE: The interval between two sounds having a frequency ration of two. There are 8 octaves on the keyboard of a standard piano.

OCTAVE BAND: A segment of the frequency spectrum separated by an octave.

OCTAVE BAND LEVEL: The integrated sound pressure level of only those sine-wave components in a specified octave band.

OSHA: The Occupational Safety and Health Administration.

PEAK SOUND PRESSURE: The maximum absolute value of the instantaneous sound pressure in a specific time interval. Note: in case of a periodic wave, if the time interval considered is a complete period, the peak sound pressure becomes identical with the maximum sound pressure.

PERIOD: The duration of time it takes for a periodic wave (like a sine wave) to repeat itself.

PERMANENT THRESHOLD SHIFT (PTS): A permanent decrease of the acuity of the ear at a specified frequency as compared to a previously established reference level. The amount of permanent threshold shift is customarily expressed in decibels.

PHON: The unit of measurement for loudness level.

PINK NOISE: Noise with constant energy per octave bandwidth.

PITCH: The attributes of auditory sensation that orders sounds on a scale extending from low to high. Pitch depends primarily upon the frequency of the sound stimulus, but it also depends upon the sound pressure and waveform of the stimulus.

PLANE WAVE: A wave whose wave fronts are parallel and perpendicular to the direction in which the wave is traveling.

PURE TONE: A sound for which the sound pressure is a simple sinusoidal function of the time, and characterized by its singleness of pitch.

RANDOM NOISE: An oscillation whose instantaneous magnitude is not specified for any given instant of time. It can be described statistically by probability distribution functions giving the traction of the total time that the magnitude of the noise lies within a specified range.

REFLECTION: The return of a sound wave from a surface.

REFRACTION: The bending of a sound wave from its original path, either because it is passing from one medium to another or by changes in the physical properties of the medium, e.g. a temperature or wind gradient in the air.

RESONANCE: The relatively large amplitude of vibration produced when the frequency of some source of sound or vibration "matches" the natural frequency of vibration of some object, component, or system.

RESONATOR: A device that resounds or vibrates in sympathy with a source of sound or vibration.

REVERBERANT FIELD: The region in a room where the reflected sound dominates, as opposed to the region close to the noise source where the direct sound dominates.

REVERBERATION: The persistence of sound in an enclosed space, as a result of multiple reflections, after the sound source has stopped.

REVERBERATION ROOM: A room having a long reverberation time, especially designed to make the sound field inside it as diffuse (homogeneous) as possible.

REVERBERATION TIME (RT): The reverberation time of a room is the time taken for the sound pressure level to decrease 60 dB from its steady-state value when the source of sound energy, is suddenly interrupted. It is a measure of the persistence of an impulsive sound in a room as well as of the amount of acoustical absorption present inside the room. Rooms with long reverberation times are called live rooms.

RMS SOUND PRESSURE: The square root of the time-averaged square of the sound pressure.

ROOT-MEAN SQUARE (RMS): 1. The root-mean-square value of a time-varying quantity is obtained by squaring the function at each instant, obtaining the average of the squared values over the interval of interest, and then taking the square root of this average. For a sine wave, if you multiply the RMS value by the square root of 2, or about 1.41, you get the peak value of the wave. The RMS value, also called the effective value of the sound pressure, is the best measure of ordinary continuous sound, but the peak value is necessary for assessment of impulsive noises. 2. A term describing the mathematical process of determining an 'average' value of a complex signal.

SABIN: A measure of the sound absorption of a surface; it is the equivalent of one square foot of a perfectly absorptive surface.

SHIELDING: The attenuation of a sound, achieved by placing barriers between a sound source and the receiver.

SONE: The unit of measurement for loudness. One sone is the loudness of a sound whose loudness level is 40 phons. Loudness is proportional to the sound's loudness rating, e.g. two sones are twice as loud as one sone.

SOUND: 1. An oscillation in pressure, stress, particle displacement, particle velocity, etc. in an elastic or partially elastic medium, or the superposition of such propagated alterations. 2. An auditory sensation evoked by the oscillation described above. Not all sound waves can evoke an auditory sensation; e.g. ultrasound.

SOUND LEVEL: The weighted sound pressure level obtained by the use of a sound level meter and frequency weighting network, such as A, B, or C as specified in ANSI specifications for sound level meters (ANSI SI.4-1971, or the latest revision). If the frequency weighting employed is not indicated, the A-weighted is implied.

SOUND LEVEL METER: An instrument comprised of a microphone, amplifier, output meter, and frequency weighting networks which is used for the measurement of noise and sound levels.

SOUND POWER: The total sound energy radiated by a source per unit time. The unit of measurement is the watt.

SOUND PRESSURE: The instantaneous difference between the actual pressure produced by a sound wave and the average or barometric pressure at a given point in space.

SOUND PRESSURE LEVEL (SPL): 20 times the logarithm, to the base 10, of the ratio of the pressure of the sound measure to the reference pressure, which is 20 micronewtons per square meter. In equation form, sound pressure level in units of decibels is expressed as SPL (dB)=20 log p/p.

SOUND TRANSMISSION CLASS (STC): The preferred single figure rating system designed to give an estimate of the sound isolation properties of a structure or a rank order series of structures.

SOUND TRANSMISSION COEFFICIENT (STC): The average amount of decibels of sound reflected away from a partition by a particular reflective barrier material.

SOUND TRANSMISSION LOSS (STL): A measure of sound insulation provided by a structural configuration. Expressed in decibels, it is 10 times the logarithm to the base 10 of the reciprocal of the sound transmission coefficient of the configuration.

SPECTRUM: The description of a sound wave's resolution into its components of frequency and amplitude.

SPEECH-INTERFERENCE LEVEL (SIL): A calculated quantity providing a guide to the interference of a noise with the reception of speech. The speech-interference level is the arithmetic average of the octave band levels of the interfering noise in the most important part of the speech frequency range. The levels in the octave bands centered at 500, 1000 and 2000 Hz are commonly averaged to determine the speech-interference level.

SPEED (VELOCITY) OF SOUND IN AIR: 344 m/sec (128 ft/sec) at 70 degrees Fahrenheit in air at seal level.

SPHERICAL DIVERGENCE: The condition of propagation of spherical waves relates to the regular decrease in intensity of a spherical sound wave at progressively greater distances from the source. Under this condition the sound pressure level decreases 6 decibels with each doubling of distance from source.

SPHERICAL WAVE: A sound wave in which the surfaces of constant phase are concentric spheres. A small (point) source radiating into an open space produces a free sound field of spherical waves.

STEADY-STATE SOUNDS: Sounds whose average characteristics remain relatively constant in time. A practical example of a steady-state sound source is an air conditioning unit.

THIRD-OCTAVE BAND: A frequency band whose cutoff frequencies have a ratio of 2 to the one-third power, which is approximately 1.26. The cutoff frequencies of 891 Hz and 1112 Hz define the 1000 Hz third-octave band in common use.

THRESHOLD OF AUDIBILITY (THRESHOLD OF DETECTABILITY): The minimum sound pressure level at which a person can hear a specified frequency of sound over a specified number of trials.

THRESHOLD OF PAIN: The minimum sound pressure level of a sound outside the ear that will produce a transition from discomfort to definite pain.

THRESHOLD SHIFT: A change in the threshold audibility at a specified frequency from a threshold previously established. The amount of threshold shift is customarily expressed in decibels.

TIMBRE: An attribute of auditory sensation allowing a subject to judge that two sound similarly presented and having the same loudness and pitch are dissimilar, e.g. trumpet vs. violin.

TINNITUS: Ringing in the ears or noise sensed in the head. Onset may be due to an acoustic trauma and persist in the absence of acoustical stimulation (in which case it may indicate a lesion of the auditory system).

TRANSDUCER: A device capable of being actuated by waves from one or more transmission systems or media and supplying related waves to one or more other transmission systems or media. Examples are microphones, accelerometers, and loudspeakers.

ULTRASONIC: Sounds or frequency higher than 20,000 hertz.

VIBRATION: An oscillatory motion of solid bodies described by displacement, velocity, or acceleration with respect to a given reference point.

VIBRATION ISOLATOR: A resilient support for vibrating equipment designed to reduce the amount of vibration transmitted to the other structures.

WAVE: A disturbance that travels through a medium by virtue of the elastic properties of that medium.

WAVELENGTH: For a periodic wave (such as a sound in air), it is the distance between analogous points on any two successive waves. The wavelength of sound in air or in water is inversely proportional to the frequency of the sound. Therefore, the lower the frequency equals the longer the wavelength.

WEIGHTING: Prescribed frequency filtering provided in a sound level meter.

WHITE NOISE: Noise with energy is uniform over wide range of frequencies, being analogous in spectrum characteristics to white light.

 
 
 
 
 
 
 
 
 
 
 
 
 
The Kennedy Company · P.O. Box 1216 · 11665 Hwy 79 · Scottsboro, AL 35768
256-259-4436 (Ext 14) · 256-259-6253 (fax)

©2009 Kennedy Company and R&D Computer Solutions.